If you own a Toyota Sienna, you may want to disable its alarm but are not too sure how to go about it. Luckily, we have done the legwork for you, and here is what we found.
Do the following to disable the alarm in your Toyota Sienna:
- Lock and unlock your door
- Turn the engine switch to the "on" position
- Remove the fuse
- Disconnect the battery
It is important to know how to disable the alarm on your vehicle in case the need arises. Keep reading to get detailed information on disabling a Toyota Sienna alarm.
How To Disable A Toyota Sienna Alarm
Disabling a Toyota Sienna alarm is an easy task. Here is how to go about it:
Lock And Unlock Your Door
The first thing to do if you want to disable a Toyota Sienna alarm is to unlock and lock the door on the driver's side. You can do this more than one time. The alarm in your Toyota Sienna could go off if the doors are opening. If you lock and unlock the door, the switch will reset, and the alarm will stop as a result.
After doing this and you might notice that using the door on the driver's side doesn't solve the problem. It is okay to use the passenger door. However, there are things that should be examined before locking the car. Always ensure there is no one in the car, the windows are closed, and no useful items are inside.
Turn The Engine Switch To On Position
If locking and unlocking your Toyota Sienna does not disable the alarm, try turning the engine switch to the "on" position. If your Toyota Sienna does not have a smart key system, move the engine switch to either "on" or "accessory." Alternatively, turn on the engine.
However, if your Toyota Sienna has a smart key system, consider turning the engine switch to "ignition on" or "accessory." After this, wait for a few seconds for the alarm to be disabled.
Remove The Fuse
This is another way of disabling your Toyota Sienna alarm. But first, you have to find the fuse that powers the alarm. The work of the fuse is to distribute electricity to the components in your car.
Therefore, taking it out isn't a guarantee that the main battery power will be disconnected. This is because a car alarm has a different fuse, which works even when the engine is inactive.
The fuse box of a Toyota Sienna can be found beneath the left part of the instrument panel, just at the back of the lid. For more information, refer to your owner’s manual for images that show where the alarm fuse box is located.
After locating the fuse box, take out the right one using pair of pliers. This should disable the alarm.
Click here to see this plier on Amazon.
Disconnect The Battery
Disconnecting the battery can disable the alarm. But it is not advisable to do this, except if disconnecting the battery is your only option. However, you may need some help unless you know how to do this well.
First, find where your car's battery is positioned. The Toyota Sienna battery can be found in the trunk, just at the back of the panel on the right-hand side. If there are some covers, take them off so you can get to the battery well.
After locating the battery, try following the back cable linking the negative terminal to your Sienna's body. Next, check for the negative terminal and ground wire, then separate them using a wrench or pliers. Do not tamper with the positive cable, just ignore it.
To remove the cable, consider taking out the nut linking the black cable to the terminal. This will shut down all the electronics in your Toyota Sienna, including the alarm. Repeat this process if the alarm doesn't deactivate.
What Triggers Toyota Sienna Alarm?
The following triggers the Toyota Sienna alarm:
Human/Animal Contact
The alarm is responsible for keeping your car safe. So, it will go off if anyone comes in contact with your car. But you have to set the alarm to do so.
It is also possible for the alarm to go off even when no one touches the car; just passing near the car can set it off. This usually happens if the sensor in your car is very sensitive. However, the alarms may become a nuisance if your car is parked in public. This can be bad if the alarm starts going off often.
Also, if a pet or animal contacts the car it can trigger the alarm. It can get annoying if the alarm starts ringing unnecessarily; this is usually the case when there are so many pets in your area.
The alarm can also go off by touching the car's tire. To stop this, consider turning off the motion sensors. You can also make some adjustments to the sensors.
Low Battery
The alarm in your Toyota Sienna is not just to keep thieves away; it also helps to let you know when your battery needs to be charged. If you notice that your car alarm is going off when trying to start your car, this may be a sign that something is wrong.
To check if you have a low battery, use a voltmeter to know your battery's voltage. If the resulting charge is no less than 12.6 volts, consider checking for other problems.
Wiring Issues
This can also cause your Toyota Sienna alarm to go off. There is a high chance that the signal will go bad if the sensor is poorly connected to the computer. In cases like this, disconnect the hood latch sensor and connect it back. The issue is likely from there. Consider repeating this process for other sensors.
Faulty Key Fob
The key fob helps in giving commands to the computer in your Toyota Sienna. And this computer is linked to the alarm system in one way or the other. So, it is possible for a faulty key fob to give false alarm signals.
To solve this problem, you have to change the key fob's battery, especially if you have failed to do so in a while. It is recommended to get new batteries at least once a year. Refer to your owner’s manual if you are unsure of the battery to buy.
Furthermore, the issue can be resolved by resetting the key fob. Don't hesitate to contact the manufacturer if you cannot do this on your own. It is also a good idea to consult the manual as the needed information may be included there.
Click here to see this key fob on Amazon.
How Long Will A Toyota Sienna Alarm Go Off?
Generally, your alarm should ring for roughly one minute. However, if the alarm is a sign of an issue or defective component, it will last for up to 20 minutes, which can be annoying. Problems like a faulty key fob or low car battery can make the alarm ring for longer.
Whenever you notice this lengthy alarm, the chances are the fob is sending a lot of signals. It is advisable to tackle the problem as soon as possible so your alarm won't keep going off.
Can I Connect Toyota Sienna Alarm To My Phone?
Yes, it is possible to connect a car alarm to your phone. A lot of advanced technology is developed to help safeguard cars, irrespective of the owner's location. You can easily know what is going on with your Toyota Sienna using an alarm system. But your phone has to be connected to the internet to get the necessary information.
Also, it is required to connect a tracker to your Toyota Sienna, then download the right app on your phone. When this is done, you can get information through the app.
To Wrap Up
To disable your Toyota Sienna alarm, all you have to do is lock and unlock your door, turn the engine switch to the "on" position, remove the fuse, or disconnect the battery. Remember, battery disconnection should be done if there are no other options. You can consult a professional whenever you need help.
If you enjoyed reading this post, here are similar articles you may like:
Acura ILX Alarm Keeps Going Off – Why And What To Do?
Wagoneer Alarm Keeps Going Off—Why And What To Do?
My Bentley Continental Alarm Keeps Going Off – Why? What To Do?