A foam cannon is a device that attaches to your garden hose or pressure washes and sprays a thick layer of soap onto your vehicle.

A pressure washer foam cannon is more effective as it will create more foam and coat your vehicle more consistently.

Let's take a look at how to wash your car with a foam cannon step-by-step.

STEP 1:

Rinse Your Vehicle

Before attaching your foam cannon or foam gun, you should rinse your vehicle. Rinsing the vehicle will remove any loose dirt or debris, making it easier for the foam cannon to do its job.

STEP 2:

Add Soap To Foam Cannon

After your vehicle is rinsed, it's time to fill your foam cannon with soap. We recommend using a soap that is approved for a foam gun.

STEP 3:

Turn On The Water Supply

Once your foam cannon is connected to your garden hose or pressure washer, you can turn on the water supply.

STEP 4:

Spray Away

A pressure washer foam gun will provide a thicker and more consistent foam layer. In addition, you will get more pressure which will make it easier to remove all dust, dirt, and debris.

STEP 5:

Rinse The Vehicle

Once you have sprayed your vehicle with the foam cannon, you can remove it. Be sure to turn off the water supply before removing the foam cannon, or you will get a bath.

STEP 6:

Dry The Vehicle

It's vital not to let your vehicle air dry. Letting your vehicle sit outside can cause water spots. If left unattended, these spots can be hard to remove and could damage your vehicle's paint.

STEP 7:

Apply Wax

To protect your vehicle's paint, it's a good idea to apply a coat of wax. There are several types of wax on the market. If you are looking for an easy but effective solution, we recommend using a spray wax.

READ MORE!

SWIPE UP