You stopped over at a gas station, but when you turned the key fob on, you were greeted with a message that said "Enter Pin" on the display screen. What does this mean? We have researched this issue and have the solution.
There are two reasons why you may get an "Enter PIN" message on the display screen. Either your key fob battery is losing power, or it is more than two meters away from the motorcycle.
Another reason could be that you're in an area with high radio interference that blocks the signal from the key fob to the motorcycle. Try calling a friend to see if you hear a static sound. If you do, you're in an area with high radio interference.
What to do:
- Make sure your key fob is within the acceptable range.
- If it's still a "no go," replace the battery with a new one.
- Move your motorcycle away if you're in an area with high radio interference.
Entering the pin code on your motorcycle can be tricky if you don't know where to look. In this guide, we'll talk about how to find the pin code on a Harley Davidson motorcycle and how to change it without the help of a mechanic so keep reading!
How To Replace Harley Davidson Key FOB Battery
Replacing a Harley Davidson key fob battery is pretty easy and will take no more than half a minute.
- Disassemble the key fob. You'll either see a couple of tabs or a slot somewhere along the edge of the key fob. Pop it open with a small flathead screwdriver.
- Once you have the key fob taken apart, you'll see the battery exposed. Carefully pry the battery out using the small flathead screwdriver.
- Slide the new battery into the slot.
- Reassemble the key fob and press the two sides together until you hear them snap and click.
How To Find Harley Davidson Pin Code
Harley Davidson's PIN code is a security feature that helps to prevent unauthorized users from using your bike. Even if you have it written down and kept inside your wallet, there is always the possibility that it may get lost.
Here's how to pull up your Harley Davidson pin code in case you forgot or lost it.
1. Turn the power on (RUN);
2. Cycle through the OFF and RUN switches twice;
3. Press the left turn signal two times;
4. Press the right turn signal switch once, then release;
5. You should see the pin code displayed on the screen.
How To Change Harley Davidson Pin Code
Every Harley Davidson owner should be aware of how to change his motorcycle's PIN code when the time comes to change it. This is a safety measure to prevent theft of the bike.
If you have not changed your PIN code for your bike in a while, you should do so because there is a chance that someone may have seen you repeatedly enter it. Here's how you do it.
1. Follow steps 1 to 4 on how to find PIN;
2. Enter your first digit by pressing and releasing the left turn switch until your desired digit appears;
3. Press the right turn signal once to move on to the next digit;
4. Repeat the process until you complete your new PIN.
The video below illustrates these steps.
How Often Should A Harley Davidson Key Fob Battery Be Replaced?
A Harley Davidson key fob battery is expected to ideally last for a couple of years. However, its lifespan depends on how frequently you use it. Typically, it lasts for about one year at best.
Even if the battery still has some juice left in it, we recommend that you change it every year. Always bring a spare battery with you when you ride because you'll never know if you're going to need it.
What Kind Of Battery Should I Use For My Harley Davidson Key Fob?
A Harley Davidson key fob uses CR2032 batteries. CR2032 batteries are designed for use in small electronic devices like PDAs, watches, calculators, and medical devices. They're commonly used in key fobs for motorcycles, scooters, mopeds, and ATVs.
These are the same batteries that are found in remote controls for garage door openers and computer motherboards.
Top 3 CR2032 Batteries
1. Energizer CR2032
Energizer CR2032 batteries provide maximum performance without overheating. This is because they are designed to perform safely in extreme temperature conditions and can last up to 10 years in storage.
Designed to provide reliable and consistent power, you can put Energizer CR2032 batteries down without worrying about anything going wrong. In fact, the only thing that could possibly go wrong is if your battery‘s performance decreases over time, which happens to all CR2032 batteries regardless of brand.
Check out Energizer's CR2032 batteries on Amazon.
2. Duracell CR2032
The Duracell CR2032 2AA Battery is the perfect choice for your devices. Its superior capacity and long life make it ideal for your electronics. It holds more power than other batteries and will last up to 10 years in storage.
The Duracell CR2032 is protected by a bitter coating to prevent accidental ingestion. Its child-resistant packaging prevents kids from opening the package.
See these Duracell CR2032 batteries on Amazon.
3. Panasonic CR2032
The Panasonic CR2032 is a great choice for electronic gadgets. It provides a long service life and excellent reliability in demanding conditions. The Panasonic CR2032 has a wide temperature range from 140°F to 14°F, ensuring its stable operation at extreme temperatures.
It features an advanced sealing technology that ensures the battery won't leak throughout its useful life. It also has a safety design that ensures it won't overheat and burst into flames when used with certain devices.
Check out these Panasonic CR2032 batteries on Amazon.
How Do I Disable Harley Davidson Security Mode?
The Harley Davidson security mode is an interesting thing that comes with your bike. The mode is a feature that automatically activates an alarm whenever it detects motion, and there is something suspicious going on.
Disabling your Harley Davidson smart security system is a fairly simple task. You can do this either by using your key fob or by entering the pin code.
What Happens If You Forget To Put Your Harley Davidson In Transport Mode On A Trailer?
Your Harley Davidson has a built-in security system. There's a sensor that sits above the ECM right under the seat that detects motion, and when it detects the slightest movement, the system will activate the alarm.
If you're planning to take your bike to a trailer, then you must put it into transport mode. Otherwise, the security system might be triggered, and your battery will be drained without your knowledge.
Transport mode basically tells your bike's ECM that the motion detected is not suggestive of suspicious activity.
Do I Need To Reprogram Key Fob After Replacing Its Battery?
Changing the batteries in your key fob is not usually a big deal. You'll get to do it once when you first get the key fob and then again if the battery life is low. Unless you're unhappy with how the key fob works, just leave it alone and don't worry about it.
However, when the key fob goes in for service, the mechanic will check the electronics and the wiring. The key fob has a little chip in it that stores information about your bike and how it works.
If found defective, he might have to replace some of the internal wiring and components, and this can be a daunting task.
For this reason, he may recommend getting you a new key fob to make it easier for both of you instead of wasting time looking for the correct parts replacement [not to mention it's not a cost-efficient option].
All he needs to do is to reprogram the key fob for it to work, and this will only take him a few minutes to complete the job. If you're interested to know how to program your key fob, you should check the video below.
How To Know If Your Key Fob Needs Replacement
Whether you are looking to test your current key fob or a brand new one, you should be able to test the signal strength using a key fob tester.
All you need to do is to turn the testing tool on and establish a connection to the key fob. You do this by pointing the transmitter of the key fob to a small square window that acts as a receiver.
A LED light indicator will light up if it's a battery issue or not. There are also two LED light indicators that will light up, indicating if you have a strong signal [new battery] or a mediocre signal [for a battery that has been around for some time].
The intensity of the pulses will vary depending on the strength of the signal.
Check out this key fob tester on Amazon.
How To Clear Codes On My Harley Davidson?
In case you don't know, the codes in your Harley-Davidson motorcycle refer to specific problem areas of your motorcycle and automatically change the settings of the engine.
There are different types of codes for each component of the motorcycle. Some codes are for the engine, some are for the transmission, and others are for the exhaust system.
These codes are important because they are related to the safety and performance of your motorcycle.
You can clear the codes on the display screen by pushing and holding the odometer button for at least 5 seconds. Release the button once you see the message "Clear."
In Closing
The best way to prevent a lock-out condition is to keep your Harley Davidson motorcycle key fob close to it. Always keep a spare battery handy, so you can easily isolate a battery issue. If everything else fails, you can always enter your pin code.
You might also like: