We may get commissions for purchases made through links in this post.
The Jeep Renegade is a small SUV that is great for the daily commutes and the occasional off-road adventure. However, if you just bought a Jeep Renegade, you might not know how to use all of the functions. For example, turning off a parking break might be an obvious thing to do, but what if you just can’t figure it out? How exactly do you turn off the Jeep Renegade’s parking brake? For your convenience, we brought you the answer.
The steps to turn off the parking brake on a Jeep Renegade are as follows:
- First, move the gear shift into the reverse position.
- Apply pressure to the brake pedal with your foot and depress the brake pedal while holding down the brake release button.
- Release foot pressure from the brake pedal when desired parking break setting or coasting is reached.
We hope that these steps help you to turn off the parking brake on a Jeep Renegade. However, for more details on how to turn off the parking brake on your Renegade, keep reading below. In addition, we will discuss other Jeeps and how to operate the parking brakes. Without further ado, let’s get into it!
Operating the Parking Brake on Jeep Renegade
As stated above, the steps to turn off the parking brake is pretty straightforward. However, we will break them down into more detail for you as follows:
1. Move gear shift from park into the reverse position.
2. Apply pressure to the brake pedal with your foot.
3. Depress the brake pedal and hold it in place while pressing down on the brake release button.
4) Release the foot pressure from the brake pedal when desired parking break setting or coasting is reached.
The parking brakes on a Jeep Renegade are located on the back right wheel and left rear wheel. In addition, to turn off the parking brakes, you need to be sure that both wheels are in the park with the shift lever in the park and the engine off. If you do not follow these steps, you can damage the parking brake system of your Renegade. Once you are ready to turn off the parking brakes, follow the above list of instructions.
For other Jeeps, it is recommended that there are 40 pounds of pressure on the brake pedal when turning off a parking brake or applying the parking brake. Turning off the parking brake on a Jeep Renegade will not lock the tires. Instead, it just keeps them from rotating.
This means that your vehicle might roll if you are operating the vehicle on an incline or hill at any time. For example, if you are on a hill and do not have a Hill Start Assist feature, which is standard on most Renegades, the vehicle will roll if you release the parking brake while it is moving.
If you are worried about turning off the parking brake on a Jeep Renegade, fear not; it is not as difficult as you think. Also, don’t worry if your Renegade is coasting at low speed and not wanting to stop moving; this can be fixed by turning off the parking brake. We hope that these quick tips help you with how to turn off the parking brake on a Jeep Renegade!
In addition to turning off a parking break, there are other things that people might want to know about a Jeep Renegade. For instance, did you know that Renegades take some getting used to?
For example, if you have never driven a Jeep before, and you jump into the driver’s seat of your Renegade, things might not seem to be going as well as you thought they would. In addition, it will take some time adapting to driving features such as turning radius and visibility on a Renegade.
How do you turn off the parking brake on a 2016 Jeep Renegade?
A few things need to be done first before you can turn the parking brake off on your 2016 Renegade, including having the gear shift in reverse and making sure the brake pedal is pushed down while holding down a release button.
Once you have followed these steps, you can turn the parking brake off by simply depressing your foot on the brake pedal and releasing it. However, make sure always to wear your seat belt even when the parking brake is turned off in case of an accident.
How do you turn off the auto park brake on a Jeep?
When in drive, it automatically engages, but if you need your parking brake on while in drive or any other gear, it’s simple to figure out!
You will need to pull the lever up and hold while pushing the gear you want, such as drive or reverse. When in park, release the lever. It should stay engaged without releasing your hand from the lever; however, when trying to shift back into drive or any other gear, it should come right back up and not move at all.
To disengage the parking brake, you reverse the process and push in on the lever while pulling the gear into drive or whatever gear you need. Then, when not using your parking brake anymore, pull out of park, with no holding down of levers needed!
How do you reset the electronic parking brake on a Jeep Renegade?
The electronic parking brake is a feature that can be found on most Jeep Renegade models, so if you have this feature in your vehicle, you may want to learn how to reset it before using it again. Resetting the electronic parking brake is easy, and you only need to complete one step: turning off the car.
This means that as long as you turn off your Renegade, the feature will be reset and ready to go for when you want to use it again. If you leave the car on, however, then the parking brake will remain engaged. When this happens, you must manually disengage the electronic parking brake before doing anything else.
Overall, the electronic parking brake is an excellent addition to your Jeep Renegade that will help you with many different things and save you time in certain instances. Check your owner’s manual or contact your local Jeep dealer for more information on the electronic parking brake.
Can you drive with the parking brake light on?
Driving with a parking brake light on is possible, but it may not be safe. It would be best not to drive with the parking brake light on because it means that your electronic parking brakes are still engaged and preventing your wheels from turning and moving the car.
If this happens, you will want to turn off the electronic parking brake as soon as possible to drive again. The best procedure for turning off the electronic parking brake when this happens is to turn off the car and then turn it back on again. This will reset your Jeep’s electronics and make sure they are working again before driving with them.
What causes the red brake light to come on?
The red brake light on the Renegade can come on for several reasons. However, there are two leading causes that you need to be aware of and two easy methods for how to turn off the Jeep Renegade parking brake after your car has been placed in the park.
The leading cause is if either or both feet are not physically pressed down on the brake pedal. This may occur because of a small object in your foot’s way, such as having shoes on with laces or an electronic parking brake that is not turned off correctly.
What does it mean when it says service electronic parking brake?
If you come across a message that says “service electronic parking brake,” it means that your electronic parking brake is not working correctly.
This could be because of a problem with the sensors, which would need to be replaced. However, it also can mean that there is an issue with the software in your car that needs to be updated. This is not a big deal and should be taken care of by a professional mechanic.
After reading this guide, you have hopefully learned everything you need to know about your vehicle’s electronic parking brake and how to use it correctly. So, take the time to test this new knowledge and practice using the electric parking brake before taking on a long road trip or heading out of town. This way, you will know that your vehicle is safe to use and to drive whenever you need it for any reason.
If you liked this article, you might also like:
We would love to hear from you! Leave us a comment below!